Pharmaceutical
Intro
The high regulatory and ultra high purity requirements of this industry drive the market at the top end to produce highly efficient innovative designs using the latest technology and the best materials. Breconcherry carries this high level of requirements right across all its’ product offering to offer only the best quality materials and designs.
Biohazard Glove Boxes
Biohazard gloves boxes and general glove boxes and containment facilities have very specific CIP cleaning in place requirements. Often the filtration capacity for the waste effluent...
More
Ducting & Pipe work
Ducting and pipe work can pose very specific problems for the pharmaceutical industry as it comprises a large part of the CIP cleaning in place needs. Often the diameter of the pipes coupled with long and complex pipe runs can generate significant cleaning challenges...
More
Fermenters & Bio Rectors
In the pharmaceutical industry, fermenters and bio reactors are usually quite small, but can range from large 10 meter tall 4 meter wide commodity process to small micro fermenters and bench top fermenters in R&D facilities...
More
Filling Lines
The pharmaceutical industries process systems culminate in the product being packaged into consumer level finished goods...
More
Hoppers
Hoppers in general tend to be quite small and can be sealed or open topped. They carry transit products and may require frequent cleaning...
More
IBC's
Industrial bulk containers or IBC’s are found in almost every industry and given their standard volume (frequently 1 cubic meter or 1000 litres) and there standard shape of approx 1 meter x 1 meter x 1 meter, they should pose a simple CIP cleaning in place problem. However, the sheer variety of products that can be contained inside them poses many cleaning issues...
More
Mixers & Blenders
Mixers and blenders as their name implies are specifically designed to agitate, mix and blend a single product or a mixture of products. The end result required very much depends on the final process requirement. However, CIP cleaning in place of such vessels can be very difficult as the design of them often does not lend itself to efficient cleaning...
More
Powder Handling Equipment
Process systems that handle powder can be prone to accumulations of powder around any protrusions or dead legs in the system. Static spray balls and nozzles fixed inside these systems can cause clumping of powder...
More
Process Vessels
In any process industry, the manufacturing process will contain various stages. During these stages a variety of individual tanks, vessels, vats and hoppers are used. These tanks hold various products at all stages of the production process...
More
Reactors
Reactor vessels within the pharmaceutical industry will quite often contain some kind of mixing device, agitator, baffle, heating coil, vortex, or other piece of equipment that makes effective CIP cleaning in place that little bit harder to achieve...
More
Tablet Coating Machines
Tablet coating machines come in a variety of shapes, sizes and complexities. All of them have specific cleaning requirements, and can often be very difficult to clean completely. Due to the complexity of the internal workings it can sometimes...
More
Tote Bins & Drums
Cleaning smaller transport containers and semi disposable vessels has often been left to manual systems. Due to the often high throughput required for this type of product and the multitude of designs, shapes and sizes automated systems have had to be very specialised...
More
